Connecting Safety Circuit Connector - Datalogic AREX 400 User Manual

Connecting Safety Circuit connector

The Safety Circuit connector must always be inserted with properly signals provided in
order to use the laser marker. The absence of such connector blocks the laser emission.
WARNING
WARNING
NOTE
Do not use the Safety Circuit Muting Device for external devices, since this
will result in loss of the safety function of the machine to which this prod-
uct is installed.
Do not use the Safety Circuit Muting Device except for maintenance oh this
product.
It is the customer's responsibility to provide a correct integration of the
safety signals according to applicable regulations.
See " Appendix B " on page 96 about the compliance to safety.
Figure 2: Connecting Safety connector
CONNECTIONS
53
USER MANUAL