On-Screen Indicators - MSA ALTAIR 5X PID Operating Manual

4 Description
Icon Alarm
4.4

On-Screen Indicators

Figure 3 Monochrome Display
1 Gas Type
2 Current Time
3 "Soft Key" q Indicator
4 Gas Reading
On a monochrome display, a message appears every 30 seconds if the Vibration, Horn, or LED alarms are turned OFF.
• Operating beep is enabled
• Device is on normal Measure Gases page
• Device is not in battery warning
• Device is not in gas alarm.
The Operating Beep can be disabled using the SETUP - INSTRUMENT OPTIONS
Device Setup) or through MSA Link software.
5 Battery Condition
6 Successful Bump Test/ Calibration Indicator
7 "Soft Key" p Indicator
ALTAIR 5X PID
8
MotionAlert (+ = ON)
Sensor Life Indicator
Bluetooth On/Off
US
(→5.5
16