Table of Contents
Advertisement
1
WARNINGS AND GENERAL PRECAUTIONS
• CAUTION! – This manual contains important instructions and warnings for personal safety. Carefully read all parts of this manual. If
in doubt, suspend installation immediately and contact Nice Technical Assistance.
• CAUTION! – Important instructions: keep this manual in a safe place to enable future product maintenance and disposal pro-
cedures.
• CAUTION! – All installation and connection operations must be performed exclusively by suitably qualified and skilled person-
nel with the unit disconnected from the mains power supply.
• CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual is
to be considered improper and is strictly forbidden!
• The product's packaging materials must be disposed of in full compliance with local regulations.
• Never apply modifications to any part of the device. Operations other than those specified may only cause malfunctions. The manufacturer
declines all liability for damage caused by makeshift modifications to the product.
• Never place the device near to sources of heat and never expose to naked flames. These actions may damage the product and cause
malfunctions.
• This product is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or who lack experi-
ence and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for
their safety.
• Make sure that children do not play with the product.
• The device is designed to operate in electrical home installation. Faulty connection or use may result in fire or electric shock.
• Even when the device is turned off, voltage may be present at its terminals. Any maintenance introducing changes into the configuration of
connections or the load must be always performed with disabled fuse.
2
PRODUCT DESCRIPTION
Plug-Control is a universal, Z-Wave Plus™ compatible, remotely controlled outlet adapter. This device may be applied wherever you want to
control electrical devices with up to 2500W load.
Plug-Control is equipped with a power and energy metering function. It uses a LED ring to visualize the current load with colour changing il-
lumination and operating mode. This is the smallest and most attractive device of this type available in the world.
Plug-Control may be operated using the B-button located on its casing or via any Z-Wave compatible controller.
Main features of Plug-Control:
•
Compatible with any Z-Wave™ or Z-Wave Plus™ Controller.
•
Supports protected mode (Z-Wave network security mode) with AES-128 encryption.
•
Extremely easy installation - simply plug the device into the mains socket.
•
Works as a Z-Wave signal repeater.
•
Active power and energy consumption metering.
•
Current value of the load and operating mode are indicated by the multi-colour LED ring.
Plug-Control is a fully compatible Z-Wave Plus™ device.
This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices
produced by other manufacturers. All non-battery operated devices within the network will act as repeaters to increase reliability
of the network. The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in
order to fully utilize the product.
3
BASIC ACTIVATION
Do not put one Plug-Control into another.
1. Plug the device into a socket nearby the main Z-Wave controller.
2. Set the main controller in (security/non-security) add mode (see the controller's manual).
3. Quickly, triple click the B-button located on the casing.
4. Wait for the device to be added to the system.
5. Successful adding will be confirmed by the controller.
6. Plug a device you want to control into Plug-Control.
7. Test the device by turning it on and off using the B-Button.
B-button
Advertisement
Table of Contents
