Set Up The Ap As An Access Point - TP-Link HC220 User Manual

Chapter 4
5 ) If you choose PPTP, enter the
Address Mode
to the DNS address mode you selected.
5. Click Save to make the settings effective, and you can refer to
Connectivity to test if the internet connection works.
Note:
It may take 1-2 minutes to save the settings.
Tips:
1. You can check your internet connection by clicking
2. If you use Dynamic IP and
please go to Advanced
3. If you still cannot access the internet, refer to the
4. 3.

Set Up the AP as an Access Point

The AP can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with the password you set for the AP.
provided by your ISP. Different parameters are needed according
PPPoE and you are provided with any other parameters that are not required on the page,
> Network > Internet to complete the configuration.
FAQ
Username and Password, and select the
Network Map on the left of the page.
section for further instructions.
Set Up Internet Connection
Test Internet
DNS
14