Faq - TP-Link HC220 User Manual

FAQ

Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the device. If the password has
been changed:
1. Connect your computer to the AP using an Ethernet cable.
2. Visit http://tplinkwifi.net, and log in with the password you set for the AP.
3. Go to Basic > Wireless
Q2. What should I do if I forget my web management password?
• Press and hold the RESET button of the AP for about 5 seconds, and then visit
tplinkwifi.net to create a new login password.
Note: You'll need to reconfigure the AP to surf the internet once the AP is reset, and please mark down your new
password for future use.
Q3. What should I do if I cannot log in to the AP's web management page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the AP correctly and the corresponding
LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure http://tplinkwifi.net
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
3 ) Click Connections
to retrieve or reset your wireless password.
Obtain DNS server address
is correctly entered.
> Control Panel >
on the bottom left.
and select Never dial a
automatically.
Network and Internet, and click
connection.
http://
Obtain an IP address
View network
91