Table of Contents
Advertisement
Chapter 4
5 ) If you choose PPTP, enter the
Secondary Connection
according to the Secondary Connection you have chosen.
5. Click SAVE.
Tips:
• If you use
Dynamic IP
and
please go to
Advanced
>
• If you still cannot access the internet, refer to the
4. 4.
Set Up the Router as an Access Point
The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
The router will reboot and switch to Access Point mode.
provided by your ISP. Different parameters are needed
PPPoE
and you are provided with any other parameters that are not required on the page,
Network
>
Internet
to complete the configuration.
FAQ
System
>
Operation
username
and password, and choose the
section for further instructions.
Mode, select
Access Point
Set Up Internet Connection
and click SAVE.
17
Advertisement
Table of Contents
