Chapter 4
5. Click SAVE.
Tips:
• If your internet connection type is
• If you use
Dynamic IP
and
please go to
Advanced
>
• If you still cannot access the internet, refer to the
4. 4.
Set Up the Router as an Access Point
The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
SAVE. The router will reboot and switch to Access Point mode.
BigPond
Cable, please go to
PPPoE
and you are provided with any other parameters that are not required on the page,
Network
>
Internet
to complete the configuration.
FAQ
System
>
Operation
Advanced
>
Network
section for further instructions.
Mode, select
Access Point Mode
Set Up Internet Connection
>
Internet
to set your router.
and click
18