TP-Link HC220 User Manual page 11

Chapter 2
Internet
Modem Router
1. Connect the power adapter to the AP.
2. Connect the WAN/LAN port of the AP to your wired router's Ethernet port via an
Ethernet cable.
3. Verify the status LED (on the bottom of the device) is flashing blue before continuing
with the configuration.
4. Connect your computer to the AP.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the computer to the LAN port of
the AP using an Ethernet cable.
POWER WAN/LAN LAN1
LAN1
• Method 2: Wireless
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the AP.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Power Adapter
2
Ethernet cable
LAN2 RESET
LAN2
POWER WAN/LAN LAN1 LAN2 RESET
1
Connect the Device
Main AP
7