Configuring Access Control - Tenda AX3000 User Manual

Parameter description
Parameter
SSID
Access Control
Mode
MAC Address
Add
Add Online Devices
Status
Operation
6.5.2

Configuring access control

Step 1 Choose Wireless > Access Control. Choose a wireless network radio band on which access
control is to be configured.
Step 2 Select the SSID to which the access control is applied from the SSID drop-down list menu.
Step 3 Enable Access Control.
Step 4 Set Mode to Forbid only or Permit only.
Step 5 Enter the MAC address of the wireless device to which the rule applies. Then click Add.
If the wireless device to be controlled has connected to the AP, click Add Online Devices to quickly add
the MAC address of the device to the access control client list.
Step 6 Click Save.
---- End
Description
It specifies the wireless network to which the rule applies.
It specifies whether to enable this function.
Set access control mode.
It indicates that only the wireless clients on the wireless
Forbid only:

access control list cannot connect to the AP with the selected SSID.
It indicates that only the wireless clients on the wireless
Permit only:

access control list can connect to the AP with the selected SSID.
It specifies the MAC address of client.
Manually add the device with the MAC address you specified to the access control list.
Add the online wireless clients to the access control list conveniently.
It specifies the status of the rule. You can enable or disable it as required.
Click to delete the rule.
52