Table of Contents
Advertisement
Example of setting up a wireless network encrypted with WPA or WPA2
Networking requirement
A highly secure wireless network is required and a RADIUS server is available. In this case, WPA or
WPA2 mode is recommended.
Assume that the IP address of the RADIUS server is 192.168.0.200, the RADIUS password is
12345678, the port number for authentication is 1812, and the SSID is hot_spot. See the following
figure.
RADIUS server
IP: 192.168.0.200
Configuration procedure
Configure the AP.
Assume that the first SSID of the 2.4 GHz radio band of the AP is to be configured.
Step 1
Choose Wireless > SSID.
Step 2
Select the first SSID from the SSID drop-down list menu
Step 3
Set Status to Enable.
Step 4
Change the value of the SSID text box to hot_spot.
Step 5
Set Security Mode to WPA2.
PoE switch
AP
IP: 192.168.0.254
SSID: hot_spot
Router
LAN port
26
Internet
WAN port
Hide quick links:
Advertisement
Table of Contents
