Connections For A Linear Editing System; Editing In Dvcam Format Using An External Controller - Sony HDV HVR-1500 Operating Instructions Manual

Connections for a Linear Editing System

Notes
When using this unit as the recorder for editing in
DVCAM format:
• It is not possible to carry edit audio channels separately.
However, if all audio channels are selected, insert
editing is possible.
• For the audio edit points, you can select a cut or fade-in/
fade-out by menu selection.
• For linear editing using an i.LINK input, if controlled
through the RS-422A interface, the edit points are offset.
Use i.LINK for the control too.

Editing in DVCAM Format Using an External Controller

Using an RM-280
The following figure shows an example of the connections
for a DVCAM format linear editing system connected to
an RM-280 editing controller, with a DSR-1500A/1500AP
as the player, and this unit as the recorder.
58
Connections for a Linear Editing System
When using this unit as the player for playback in HDV
format:
When using this unit as an HD linear editing player, this
unit does not support synchronization. Either turn the
controller's player synchronization function off, or set it to
"Preroll & Play."
Note
A tape recorded in HDV format cannot be edited with this
unit when using this unit as the recorder in an editing
system.