Assigning A Function To The Assign Button - Sony HDV HVR-1500 Operating Instructions Manual

1
Press the RESET (NO) button.
The factory default setting of "x 1" is selected.
2
Press the SET (YES) button.
The setting returned to its factory default is saved in
memory as the current setting.
To return all settings to their factory default
settings
1
Press the MENU button to display the menu selection
level.
2
Press the ,/B button to display level 1 of the setup
menu.
3
Press the RESET (NO) button.
A message appears, to confirm whether or not you
wish to return all settings to their factory default
settings.
Monitor screen INITIALIZE ALL ITEMS TO
message FACTORY PRESET VALLUES?
Message in the time Init setup?
counter display
4
Press the SET (YES) button.
The message "NOW SAVING..." appears on the
monitor screen, and "Saving..." appears in the time
counter display, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
Note
If you power off the unit while settings are being
saved, settings may not be correctly returned to their
factory default settings. Wait until the saving is
completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the
RESET (NO) button. The display returns to menu level 1,
leaving the settings unchanged.
Assigning a Function to
the ASSIGN Button
You can assign a desired menu item (level 1 or level 2) to
the ASSIGN button. Once you assign a frequently-used
menu item, you can recall the menu by simply pressing the
ASSIGN button.
Menu items that can be assigned to the
ASSIGN button
Depending on the setting in MENU GRADE, you can
assign menu item from level 1 and level 2 of the SETUP
MENU. To assign ENHANCED menus, set the MENU
GRADE to ENHANCED.
To assign a function to the ASSIGN button
Use the following procedure.
MENU ASSIGN
1
TC
PRESET
A
1
Press the MENU button.
The monitor screen shows the menu selection levels.
S Y S T E M M E N U
S E T U P M E N U
A U T O F U N C T I O N
H O U R S M E T E R
Monitor screen
2
With SETUP MENU selected, press the ,/B
button.
All basic items in setup menu level 1 are displayed.

Assigning a Function to the ASSIGN Button

RESET(NO)
SET(YES)
8
4,6
2,3,5,7
B
Setup menu
Time counter display
89