Changing Menu Settings
This section explains how to change menu settings.
Buttons Used to Change Settings
Use the following buttons in the front panel to change the
menu settings.
Menu control
Functions
buttons
MENU button
• Opens the menu and launches menu
control mode.
• Closes the menu and exits menu
control mode.
M and m buttons These buttons move the highlighted
cursor up and down within the current
level to select an item or setting.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
</A and ,/B
• Press the ,/B button to go down
buttons
one level.
• Press the </A button to go up one
level.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
RESET (NO)
• Returns the setting to the factory
button
default setting.
• Sends a negative response to
prompts on the monitor screen.
SET (YES)
• Saves the new setting in memory.
button
• Sends a positive response to prompts
on the monitor screen.
Changing the Settings of BASIC
menu Items
The factory default setting is to display only the BASIC
menu items. To change the settings of BASIC menu items
proceed as follows.
Changing Menu Settings