Menu Settings - Sony HDV HVR-1500 Operating Instructions Manual

• Items regarding interface (format) select
• Items regarding the menu bank operations
For details of each menu item, see Chapter 7, "Menus"
(page 70).

Menu settings

Buttons used to change settings
Use the following buttons in the menu control section to
change the menu settings.
Menu control Functions
buttons
MENU button • Opens the menu and launches menu
control mode.
• Closes the menu and exits menu
control mode.
M and m buttons These buttons move the highlighted
cursor up and down within the current
level to select an item or setting.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
</A and ,/B • Press the ,/B button to go down
buttons
one level.
• Press the </A button to go up one
level.
Hold down one of these buttons to
make the highlighted cursor move
continuously.
RESET (NO) • Returns the setting to the factory
button
default setting.
• Sends a negative response to
prompts on the monitor screen.
SET (YES) • Saves the new setting in memory.
button
• Sends a positive response to prompts
on the monitor screen.
Displaying the ENHANCED menu items
The factory default setting is to display only the BASIC
menu items. To display the ENHANCED menu items
proceed as follows.
MENU ASSIGN
1
TC
PRESET
A
1
Press the MENU button.
26
Before Using this Unit
RESET(NO)
SET(YES)
6
3,5
2,4
B
The menu selection level display appears on the LCD
monitor or the external monitor.
In the figure below, SETUP MENU is selected (shown
in reverse video).
The time counter display of this unit shows only the
currently selected item. When the item name is long, it
is abbreviated.
Menu selection level display
S Y S T E M M E N U
S E T U P M E N U
A U T O F U N C T I O N
H O U R S M E T E R
Monitor screen
2
With SETUP MENU selected in reverse video, press
the ,/B button.
This displays all BASIC menus on menu level 1.
Level-1 menu display
S E T U P M E N U
O P E R A T I O N A L F U N C T I O N
D I S P L A Y C O N T R O L
T I M E C O D E
S E T U P B A N K O P E R A T I O N
S Y S T E M S E L : J
M E N U G R A D E : B A S I C
Monitor screen
3
Press the M or m button to select MENU GRADE.
Display when MENU GRADE is selected
S E T U P M E N U
O P E R A T I O N A L F U N C T I O N
D I S P L A Y C O N T R O L
T I M E C O D E
S E T U P B A N K O P E R A T I O N
S Y S T E M S E L : J
M E N U G R A D E : B A S I C
Monitor screen
4
Press the ,/B button.
This displays menu level 2 for MENU GRADE.
Level-2 display for MENU GRADE
S E T U P M E N U
M E N U G R A D E : B A S I C
* B A S I C
E N H A N C E D
Monitor screen
Setup menu
Time counter display
Operational
Time counter display
Menu grade
Time counter display
Basic
Time counter display