Sony HDV HVR-1500 Operating Instructions Manual page 74

OPERATIONAL FUNCTION [Operational]: Operation
settings
AUTO EE SELECT [> Auto
EE]:Determine whether
the unit enters EE mode
or PB mode when audio
and video signals from
other equipment are
input.When this unit is
used as the recorder for
cut editing, it is possible to
output the input audio and
video signals to the
monitor. This enables
editing operation to be
carried out using a single
monitor.
LOCAL ENABLE [> Local ENA]: Select which of the tape
transport control buttons (EJECT, REW, PLAY, F FWD,
STOP, and REC) operate when the LOCAL/REMOTE
switch is set to REMOTE.
REC FORMAT [> REC format]: Select the recording format.
ASSIGN KEY [> assign key]: Select the menu item (item
from level 1 or level 2) to be assigned to the ASSIGN
button. When you assign an item, you can then recall the
function directly.
REC INHIBIT [> REC INH]: Determine whether to prohibit
recording on tape. When set to ON, REC INHIBIT
indicator appears on the front panel and recording on a
tape is inhibited.
SEARCH ENABLE [> Search ENA]: Select whether to
enable playback in shuttle/jog mode by the use of the
arrow buttons.
74
Menu Contents
CASSETTE OUT [>> Cass.
out]: Operations when
the cassette has been
ejected
F. FWD/REW [>> F. FWD/
REW]: Operations when
in fast forward or rewind
mode
STOP [>> STOP]:
Operations when in stop
mode
STANDBY OFF [>> STBY
OFF]: Operations when
in standby off mode
Description of settings
*EE [>>> EE]: Output video and audio signals received from
other equipment.
PB [>>> PB]: Do not output video and audio signals.
*EE [>>> EE]: Output video and audio signals received from
other equipment.
PB [>>> PB]: The unit enters playback mode and outputs a
playback video signal. Audio signals are suppressed.
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: The unit enters playback mode and outputs a
still picture.
EE [>>> EE]: Output video and audio signals received from
other equipment.
*PB [>>> PB]: The unit enters playback mode and outputs a
still picture.
ALL DISABLE [>> All DIS]: All of the tape transport control
buttons are disabled.
*STOP & EJECT [>> STOP&EJ]: Only the STOP and EJECT
buttons are enabled.
ALL ENABLE [>> All ENA]: All of the tape transport control
buttons are enabled, and settings such as preroll time
change or time data display selection are effective.
*DVCAM [>> DVCAM]: DVCAM format
DV (SP) [>> DV (SP)]: DV (SP) format
Note
When i.LINK (HDV) input is selected, the recording format is
set to HDV regardless this menu setting.
For details of the possible menus that can be assigned to the
ASSIGN button, see "Assigning a Function to the ASSIGN
Button" (page 89).
*OFF [>> OFF]: Do not prohibit recording on tape.
ON [>> ON]: Prohibit recording on tape. (The REC INHI
indicator in the display section lights.)
*DISABLE [>> DISABLE]: Do not enable.
ENABLE [>> ENABLE]: Enable.