Related Manuals for Caple Sirocco Si800
Summary of Contents for Caple Sirocco Si800
- Page 1 Instruction manual for Sirocco 80 cm hood Model code: Si800 Contact Caple on 08448003830 or for spare parts www.4caple.co.uk...
- Page 3 ��������� � � � � ����� � � � ��� � ��� � � ����� - 3 -...
- Page 4 ��� � � � ��� ��� � ��� ��� ����� � � � � � � � � � � ����� - 4 -...
- Page 5 � ����� � � � � ����� � � � � � � � � ����� - 5 -...
- Page 6 � � � � � � � � � ��� � � � � � � � � ����� - 6 -...
- Page 7 � � � � ����� ������ � � ������ - 7 -...
- Page 8 � � � � � ������ ������ � � � � � � � � � � � � � � � � � � ������ ������ � � � � � � � � � � � � ������ - 8 -...
-
Page 9: Safety Precautions
ENGLISH a suitable manner, the user is helping to prevent potential GENERAL damage to the environment or to public health. Carefully read the following important information regarding symbol on the product or on the accompanying installation safety and maintenance. Keep this information paperwork indicates that the appliance should not be treated booklet accessible for further consultations. -
Page 10: Installation
be suitable for the load required and it must comply with - When carrying out the fixing operations, use only screws current legislation. and screw anchors suited to the type of wall (e.g. reinforced concrete, plasterboard etc.). • If the hob is electric, gas, or induction, the minimum If the screws and screw anchors are supplied with the distance between the same and the lower part of the hood appliance, make sure that they are suited to the type of wall... -
Page 11: Use And Maintenance
filters (washable). (Fig.10). In order to replace the dichroic lamps, carefully remove Unlike traditional carbon filters, this carbon filter can be the lamp from the lamp holder with the help of a small flat screwdriver or a similar tool. PLEASE NOTE! In doing this washed and reactivated for approximately 12-15 times. - Page 12 runs for 10’, then the appliance go back to work at the original same operation to turn them off. speed. During this function the display blinks. Lights indicator (E) = The lights indicator will switch on when Key E = The Timer times the functions on activation for the lights are on at any level.
- Page 16 3LIK0754...