Advertisement
The upper chimney section sits inside the lower chimney section.
The upper chimney section sits inside the lower chimney section.
The upper chimney section sits inside the lower chimney section.
Mark the location of upper chimney bracket fixing holes on the wall. Drill two holes using an
Mark the location of upper chimney bracket fixing holes on the wall. Drill two holes and insert 2
Mark the location of upper chimney bracket fixing holes on the wall. Drill two holes using an
8mm drill bit and insert 2 wall plugs. Fix the upper chimney bracket to the wall using 2
wall plugs. Fix the upper chimney bracket to the wall using 2 screws (ST4x30mm).
8mm drill bit and insert 2 wall plugs. Fix the upper chimney bracket to the wall using 2
screws (ST4x30mm).
screws (ST4x30mm).
Pull the upper chimney section upwards
Pull the upper chimney section
to the target height, then fix to the upper
Pull the upper chimney section
upwards to the target height, then fix
chimney bracket using 2 screws (4x8mm).
upwards to the target height, then fix
to the upper chimney bracket using 2
to the upper chimney bracket using 2
screws (4x8mm).
screws (4x8mm).
Please keep this instruction manual for future reference
Upper Chimney Bracket
Upper Chimney Bracket
Upper Chimney Section
Upper Chimney Section
Instruction manual SP612 / SP912
13
Advertisement
