All manuals and user guides at all-guides.com
MT56DSU-R Owner's Manual
3.1 Introduction
This chapter provides information on the operating functions of the
MT56DSU-R. During normal operation the MT56DSU-R requires no
operator intervention.
Many of the optional features of the MT56DSU-R are selected by
setting a switch. Please refer to changing the default DIP switch
settings in Installation (Chapter 2) to change your particular
environment.
3.2 Options
The switchable features of the MT56DSU-R are:
Data Rate
Async/Sync
Anti-Streaming
Elastic Store
System Status
Circuit Assurance
The MT56DSU-R has a pre-configured (default) setting for each of
these options when shipped from the factory. Chapter 2 of this
manual covers the changing of these option DIP switches. Chapter 4
covers the Normal/Diagnostic switch function. The following sections
describe the option in terms of the operation of the MT56DSU-R in a
DDS or other 4-wire network.
3.2.1
Data Rate
This option allows selection of the MT56DSU-Rs data transmission
rate. The data rate selected here must match the DDS or other 4-
wire network line rate that you subscribed for with your telco.
The default for this function is a data rate of 56K bps. (Refer to
Chapter 2 for option switch selection.)
3.2.2
Async/Sync
This option allows selection of the MT56DSU-Rs type of data
transmission used. The transmission type selected here must match
the DTE. The default is sync (synchronous data transmission).
24
82023101.p65
Clocking
RTS Forced On
DSR Forced On
Async Word Length
Normal/Diagnostics
24
2/12/01, 2:52 PM