Table of Contents
Advertisement
inspection, especially of the blade, making
sure that the screws and knife assembly
are neither worn nor damaged. Replace
worn or damaged blades and all screws to
maintain balance.
Examine closely the area where you are
going to use the mower and remove all
objects that could be thrown by the
machine (stones, twigs, wire, bones etc.).
Before mowing, install and check the
condition of the grass catcher.
C) WARNINGS AND HAZARDS
Moisture and electricity do not mix well.
The handling / connection of the cables
should be done in a dry place.
Use a 30mA residual current device (RCD).
Always avoid contact between an electrical
plug or cable and a wet area (puddle or wet
grass)
The connections between the cables and
sockets should be waterproof. Only use the
extensions with waterproof sockets by
moulding or according to current standards,
available on the market.
Power supply cables should not be of a
lower
H05RR-f.H05WF.H05VVH2-F. For outdoor
use, with a minimum cross-section of 1.5
m².
Attach the cable to its hook before starting
the equipment.
The permanent connection of any electrical
device in a building should be performed
by a qualified electrician, in accordance
quality
04
than
type
H05RN-F.
Advertisement
Table of Contents
