New Pin Code
Enter the Setting menu.
●
Use buttons (1) and (2) to select item "Pin Code"
●
and press the ENTER button (3).
Select the "New Pin" item and press the ENTER
●
button (3).
The display shows the message "New Pin" and the
spaces to enter the four digits of the new pin
(Fig 129). The two arrows above and below the first
digit give the possibility to set it. Entering the code:
Use buttons (1) and (2) to increase and decrease
●
by 1 the value from "0" to "9".
Press the ENTER button (3) to confirm the digit
●
and move on to the following digit.
Repeat the procedure until entering all 4 digits.
●
192
Back
New Pin
...
New Pin
0 - - -
...
Fig 128
Fig 129