LAP EVO
If the bike is equipped with the GPS EVO module, the
LAP EVO function is enabled. The display shows GPS
symbol (D) further to timer and lap number.
Here are the screens for Track Info Mode (Fig 79) and
Track Evo Info Mode (Fig 80).
Unlike the LAP BASIC, the LAP EVO allows recording
the position of the finish-line and 2 intertimes. Once
the finish-line and intertime coordinates are
recorded, the LAPs are managed by the GPS.
To set the finish-line and the intertime coordinates it
is necessary to:
position the bike on the finish-line and press the
●
FLASH button (4) to record the coordinates; the
symbol (E) is displayed;
position the bike on the first intertime and press
●
the FLASH button (4) to record the coordinates;
the symbol (F) is displayed;
position the bike on the second intertime and
●
press the FLASH button (4) to record the
coordinates; the symbol (G) is displayed.
The set coordinates remain recorded also after a
key-off.
To change the coordinates of one or more positions,
repeat the recording procedure described above by
126
D
E
LO
HI
01'35.27
1 2
Lap 1/60
4
190
SPORT
Gear
F
G
km/h
SETTING MENU
1245
km
TOT
TRIP 1
0.0 km
- 00.85
E
D
F
G
4
1
11:34
A.M.
RPM X 1000
DTC 3
DWC 3
DSC 2
2
3
Fig 79
Fig 80