NRS Healthcare Mowbray M11089 User Instructions

M11089
M92739
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
1.

INTENDED USE

The height and width* adjustable Mowbray toilet frame and seat has been designed to assist those who
have diffi culty in lowering onto or rising from a standard toilet. The comfortable plastic moulded seat off ers
support in a natural position. An optional fl oor fi xing kit is also available (F11572).
*M11089 – Mowbray width adjustable version only.
2.

SAFETY

WARNING: The maximum user weight must not be
more than 190Kg (30st).
DO NOT: Attempt to stand or climb on the product.
MAKE SURE: All legs are set at equal height to
avoid rocking.
3.

UNPACKING

Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1 Contents
Item
Toilet Seat
Seat Frame Assembly
RH Frame Assembly
LH Frame Assembly
Crossbars
Leg Extensions with Ferrules
E-clips
MOWBRAY TOILET SEAT & FRAME RANGE
Mowbray Width Adjustable (Free Standing)
Mowbray Toilet Seat & Frame 510 (Free Standing)
M11089 M92739
1
n/a
1
1
2
4
8
USER INSTRUCTIONS
4.

ASSEMBLY

These products are supplied fully assembled apart
from the seat.
4.1 Fit the Seat
Remove the seat from the bag and snap into place
on the centre bars of the frame.
5.

INSTALLATION

Adjust the height and width* for the toilet and user
before installation.
5.1 Adjust the Height - M11089 & M92739
1. Remove the 4 x leg extension E-clips.
2. Slide the leg extensions to the required height,
align the holes and replace the E-clips.
3. Lift the toilet seat and lid.
1
4. Place the Mowbray over the toilet with the
1
cutaway of the seat at the front and the integral
n/a
splash guard placed centrally over the toilet
n/a
bowl.
n/a
4
Note: Make sure the seat and toilet frame are fully
4
secure before use.
1
Maximum User Weight
30st
190kg