NRS Healthcare M01278 User Instructions

M01278 Over Bed / Chair Table (No Castors)
General Safety Warning
Please make sure that you read and follow
these instructions carefully. Keep these
instructions in a safe place for future reference.
1. INTENDED USE
Designed for use when sitting in either a chair or bed
these tables provide an adjustable height fl at surface
for reading, writing, eating etc. The table top can be
tilted for increased comfort during use.
2. SAFETY
Warning: Do not overload the table top, 5kg
Max Load.
CHECK hand-wheels are secure at regular intervals.
DO NOT attempt to use the table as a walking aid.
DO NOT attempt to sit or stand on the table.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1 Contents:
1. Table Leg with Castors (M15691) x 2
2. Table Leg without Castors (M01278) x 2
3. Cross Bar (with Castors) x 1
4. Telescopic Tube x 1
5. Hand-wheel - Long-screw x 2
6. Hand-wheel - Short-screw x 2
USER INSTRUCTIONS
OVER-BED / CHAIR TABLE
M15691
4.
4.1
1. Refer to Figure 1. Position the cross brace over
the two side frames as shown.
2. Use the 2 x long-screw hand-wheels to secure
the cross brace to the side frames.
4.2
1. Turn the table top upside down and lay fl at.
Note: The table-top brackets are set at diff erent
distances from the table-top edges.
2. Slide the two silver telescopic tubes through the
fi rst set of brackets closest to the edge of the
table-top.
3. Press in the button clips (A), then slide the
telescopic tubes all the way through the fi rst set
of brackets.
1
Over Bed / Chair Table (Castors)
ASSEMBLY/INSTALLATION
Frame Assembly:
Figure 1: Assemble the Cross Brace
Table-top Assembly:
Figure 2: Assembling the Table-top
A