03_Data Transmission Protocols; 04_Cadence Sensor; 05_Product Modifications; 06_Disclaimer - eLine ARION DIGITAL SMART B+ Instructions Manual

03_DATA TRANSMISSION PROTOCOLS

Arion Digital Smart B+ uses two different transmission
protocols to interact and send data to software / app /
device.
Please contact the app / software / device manufacturer to
verify compatibility with one or more of these protocols.
ANT+
ANT+ FE-C: this protocol allows the software / app / devi-
ce to receive training data and adjust hometrainer resistan-
ce. This protocol permits total interaction with the home-
trainer.
ANT+ Speed&Cadence*: this protocol transmits hometrai-
ner speed and cadence data. Although more common than
the ANT+ FE-C, it does not allow interaction and the app/
software/ device.
ANT+ Power: this protocol transmits the cyclist's power
output data. Also much more common than the
ANT+ FE-C, but this protocol does not allow interaction
between the hometrainer and the app/software/device.
With the exception of smartphones that feature integrated
ANT+ connectivity, a USB dongle is necessary to connect
via the ANT+ protocol.
If iOS devices are used, a specific dongle is needed (not
included).
A complete list of ANT+ compatible devices is available at:
http://www.thisisant.com/directory/
BLUETOOTH SMART
Fitness Machine - Indoor Bike service This protocol sends
training data to compatible software / app / device and
adjusts resistance on the hometrainer. This protocol offers
total interaction with the hometrainer.
Speed&Cadence Service*: this protocol transmits home-
trainer speed and cadence data, but does not allow inte-
raction between software / app / device and the hometrai-
ner.
Power Service: this protocol transmits the cyclist's power
output data, but will it also not allow interaction between
software / app / device and the hometrainer. In most cases,
smartphones and tablets already
feature Bluetooth Smart connectivity, so there is no need
for additional components to communicate
with the Arion Digital Smart B+. However, the more outda-
ted devices might not be compatible. Please consult your
app provider to make sure that it's Bluetooth Smart com-
patible.
NOTE: When the hometrainer is connected to the device by
a Bluetooth Smart protocol, it cannot be connected to
additional devices. This is a restriction of the Bluetooth
Smart protocol itself.
* Attention: if the program / app / device uses the
Speed&Cadence protocol for speed reception, the circum-
ference value to be set depends on the roller.
In the Arion Digital Smart B+, the circumference to be set
is 67 mm.

04_CADENCE SENSOR

The Arion Digital Smart B+ roller does not use a sensor for
measuring the cadence. This is possible thanks to a sophi-
sticated calculation based on the speed. Since this is not a
direct measurement, but the result of a calculation, in
particular situations the cadence value may not be accu-
rate.

05_PRODUCT MODIFICATIONS

Also in view of any technical update, ELITE reserves
the right to make changes to the products or their
specifications without being obliged to notify or inform the
Customer beforehand for:
a) changes that do not affect negatively the product
performance;
b) changes required to meet or improve the product
specifications;
c) changes necessary for the products to comply with the
applicable legal requirements.
ELITE also reserves the right to supply these products
with these improvements without being obliged to or
responsible for applying the same modifications to any
previously purchased products, reserving also the right to
change prices and model availability according to market
conditions, component availability and other corporate
considerations.

06_DISCLAIMER

Elite S.r.l. is not liable for any temporary or permanent
damage to the physical integrity of the user, whether direct
or indirect, resulting from the use of the trainer.
IMPORTANT
Pay attention to the position of hands when closing
the roller, to avoid squashing them between the two
side members

07_NAME AND LIST OF COMPONENTS

N°3 Side members
N°1 Longitudinal member with resistance
N°4 Rectangular covers
N°2 Round covers
N°1 Drive belt
N°1 Front roller
EN
A
B
C
D
E
F
13