Communicating Display Assembly - Trane ComfortLink II 4TWV8X24A1000A Installer's Manual

Communicating Display Assembly (CANda)
SYSTEM STATUS
XXXXXXXXXXXXXXXX
MONITOR MENU
The Monitor Menu
displays information
on System status, Drive
stats and the System
Tachometer.
Scan to see an
overview video
about the CANda
Note: CONFIG MENU is only available in clii mode.
Note: See the Service Facts found in the control box of the outdoor unit for more information.
18-BC106D1-1C-EN
NAVIGATION
• To enter and exit Technician Menus, press the Up/Down buttons
simultaneously for 5 seconds.
• To return to the Home Screen, press the Up/Down buttons
simultaneously for 5 seconds.
• To return to the top level of any menu, press the Left/Right buttons
simultaneously for 5 seconds.
• After ve minutes of inactivity in the Technician Menu section, the
Home Screen will be displayed. Pressing the Enter button for
5 seconds will increase this time to 20 minutes.
TECHNICIAN MENUS
ALERT HISTORY
ALERT MENU
MENU
The Alert Menu The Alert History menu
displays active alerts. displays alerts stored
over time. Note that
clearing Alert History
will also clear Active
Alerts.
CONTROL MENU
CONFIG MENU
The Control Menu
The Con guration
contains a selection of
Menu is where System
unit function tests that
parameters and
are used to verify
options are set and
reported. operation.
1. External shut down 1. FRC DFT (Forced Defrost)
(Load Shed) 2. EEV Test
3. Evacuation
2. Min. Air ow
3. Blower on/o delays 4. Drive Diagnostic Test
4. Custom Air ow
5. OD Fan Test
5. PFC (Power Factor
Correction)
27