Electrical - Low Voltage; Communicating - Trane ComfortLink II 4TWV8X24A1000A Installer's Manual

Electrical – Low Voltage Communicating
Table 20. Low Voltage Maximum Wire Length
Table 20, p. 16 defines the size and combined total maximum length of
low voltage wiring from the outdoor unit, to the indoor unit, and to the
thermostat.
Note: The use of color coded low voltage wire is recommended to
simplify connections between the outdoor unit, the control, and
the indoor unit.
Note: The maximum total cable length for the entire comfort control
communicating system is 500 ft. 18 AWG.
Table 21. Low Voltage Hook-up Diagrams in Link mode
UX360
Smart Thermostat
R
DH
DL
B
SC360
System Controller
R
DH
DL
B
1. In communicating mode, unused terminals are non-functional. Do not use.
2. Terminals present will vary by indoor model.
3. "D" is the data line. Installer to select a wire color.
Note: Anti-oxidizing grease is supplied in the documentation package for use when making low voltage field wiring connections at the outdoor
unit. Apply grease to field wiring before installing wire caps to protect these connections from corrosion.
16
Figure 1. Fully Communicating System
The Brown data wire used in clii mode is NOT
used in Link mode (Cap off if not used)
Distribution Indoor
Board Unit
R R
DH DH
DL DL
B B
CONTROL WIRING
WIRE SIZE
18 AWG
Communicating Outdoor Unit
Neatly bundle all low
voltage wires as shown.
White
Blue
Green
MAX. WIRE LENGTH
500 Ft. Combined
Red
Only used
for Load Shed and
Link Smart Charge TM
(Cap off if not used)
18-BC106D1-1C-EN