Music (if any)
This function allows you to manage the music player
and is only available if the Bluetooth module is
installed and a smartphone connected.
For the Bluetooth pairing procedure, refer to sub-
section "Bluetooth device pairing and management"
(page 19).
Use buttons (1) and (2) to select "PLAYER" in the
function menu (page 156):
1)
If the music player is not active, the instrument
panel displays "PLAYER OFF". To activate it and
enter the music player menu, press button (4).
2) If Player is active, the instrument panel displays
"PLAYER ON". To access the music player menu,
keep button (1) pressed for 2 seconds. To turn
the music Player off, press button (4).
Note
The Player function cannot be activated when a
call is incoming, in progress or in recall. If the
smartphone is disconnected, player is turned off.
34
1
4
2
Fig 15
1
4
2
Fig 16