Dqs - Accessory - Ducati MULTISTRADA V2 2022 Owner's Manual

DQS - accessory

DQS function is an option.
If DQS is installed on the motorcycle, the instrument
panel displays DQS status as follows:
if DQS system is enabled, the indication to
●
engage the gears "DQS – UP/DW" is displayed;
if DQS system is in reduced performance mode,
●
the indication to engage the gears "DQS –
UP/DW" is displayed flashing;
if DQS system is disabled, "DQS –" is displayed;
●
if the DQS system or the control unit is in fault,
●
the "DQS –" indication is displayed flashing.
The DQS with up/down feature allows the rider to
upshift and downshift without using the clutch lever.
It includes a two-way microswitch - built in the lever
mechanism - that outputs a signal to the engine
control unit whenever the gearshift is operated.
The system works in a different way when upshifting
and downshifting.
Here below are some tips that will ensure you
properly exploit this feature:
1) The Ducati Quick Shift takes the same shift lever
operation as with vehicle not equipped with the
154
Ducati Quick Shift. Ducati Quick Shift is not
designed for shifting automatically.
2) For any gearshift request (up or down) the rider
has to move the shift lever from its idle position
in the desired direction against the force of the
spring through a certain over-travel, then keep
the shift lever in this position until the gearshift
is completed. Once the gearshift has been
completed, the lever has to be fully released in
order to allow another gearshift acted by Ducati
Quick Shift. If the rider does not move the shift
Fig 107