When system is enabled, "ABS-ON" is displayed, the
ABS light turns on to indicate that the ABS is active
and buttons (1) and (2) are enabled.
If the ABS status does not change in 5 seconds, the
instrument panel will replace "WAIT ..." message
within the Menu with "ABS-ERR" message blinking
for 3 seconds.
After 3 seconds:
if disabling was requested, the instrument panel
●
automatically shows again "ABS-ON" and the
request can be made again, if required;
if enabling was requested, the instrument panel
●
automatically shows again "ABS-OFF" and the
request can be made again, if required.
162