Function menu
1
The function menu (A) contains all available
functions and meters with travel information.
The units of measurement of the trip information
can be changed using the "UNITS SETTING"
function in the SETTING MENU (page 195).
Using buttons (1) and (2) it is possible to scroll
through the items in the menu: on the left-hand side
inside the box, the UP
and DOWN
arrows
corresponding to button (1) and button (2) appear.
4
2
A
The empty circle symbol
is displayed when it is
Fig 108
possible to interact with the displayed function by
pressing button (4) (for instance to reset TRIP 1).
When the instrument panel is on, the TOT function is
displayed for 10 seconds, followed by the function
that was active before the instrument panel switch-
off.
156