Table of Contents
Advertisement
6 ERROR MESSAGES AND TROUBLE-
SHOOTING
The control program checks the operational conditions needed for proper
execution of the instrument's functions. If the check ends with the indication of a
malfunction, an error message will be displayed. The list of error messages,
below, includes suggestions on how to eliminate problems.
Error message
1. Tray moving error!
2. Memory is full!
3. Battery low!
4. Netw. comm. error!
5. Serial disabled!
6. There is no strip!
7. Remove the strip!
8. Wrong calibr. code!
9. Expiry date error!
10. Is not meas. number!
11. Need calibration code!
Note: If a problem cannot be solved or a malfunction is experienced that is not
listed above, please, contact your HUMAN distributor immediately.
User Manual COMBILYZER Plus
Action to be done
check the tray opening path
clear some memory addresses
recharge the batteries
check the serial com. synchronisation
enable the serial output
load a strip into the strip holder
remove the strip from holder
re-enter a valid calibration code
enter a valid calibration code
enter a valid calibration code
enter a valid calibration code
19/22
Advertisement
Table of Contents
