Setting Pad Sequence In The Printout - Human COMBILYZER Plus User Manual

4.3.3

Setting Pad Sequence in the Printout

Select the Menu/Strip/Padseq. submenu to change the pad sequence in the
printout. In this function menu, the left column on the LCD indicates the
previously set pad sequence, while the list of pads on the right shows the pad to
be selected in default sequence. Figure 8 depicts the display showing the default
settings of the pad sequence function menu.
Figure 8. Changing the pad sequence
User Manual COMBILYZER Plus
Pad names can be marked in the list
on the right with the help of the UP
and DOWN control buttons. When
the desired pad name is marked
select it by pressing CHOOSE. The
selected pad name will be removed
from the list on the right and appear
in the first position in the list on the
left. The next pad can now be
chosen from the list of remaining
pads on the right following the same
procedure. Each succeeding pad will
appear in the list on the left one
position lower until there are no more
pads left in the list on the right. Store
the changes and return to main
menu by pressing the OK button.
11/22