Table of Contents
Advertisement
4.6
Memory/Data Management
4.6.1
Result Printout
Enter the Memory/Print submenu to
print out records stored in the
memory. A range of stored records
can be selected for printing. The limits
of the selected range are displayed in
the top-right corner (see figure 10).
They can be selected simply tapping
them. The selected limit can be
adjusted with the help of the UP and
DOWN arrows. The lower limit can
not be higher than the upper limit,
therefore increasing the low limit will
increase the high limit and decreasing
the high limit will decrease the low
limit if the value was the same. The
selected range can be printed out by
pressing PRINT.
For example on figure 10. the low limit is 39 and 41 is the high limit of the range
to be printed. Pressing the PRINT button will therefore print three records, 39-40-
41.
User Manual COMBILYZER Plus
Figure 9. Selecting a memory range
for printing
15/22
Advertisement
Table of Contents
