Scanning Reflective Originals - Microtek Bio-5000 Manual

1. Raise the scanner lid, and place the
2. Launch ScanWizard Bio either as a stand-
3. Go to the Preview window of ScanWizard Bio, and choose Reflective from the
4. Click the Overview button to perform a preliminary scan of the image, which will
5. Select the Scan Frame tool from the Toolbar in the Preview window, and choose
6. Click the Prescan button to display a detailed image area selected via the
7. Specify your scanning requirements in the Settings window.
8. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
9. If the colors in your reflective original are faded and need restoring, check the
10. Click the Scan (or "Scan to") button in the Preview window to start scanning.
14 Bio-5000 Supplement

Scanning Reflective Originals

reflective original to be scanned face down
on the scanner glass bed, towards the
front of the scanner. Center the top of the
original along the horizontal ruler on the
scanner.
alone by clicking on the program icon, or
by using the File-Import or File-Acquire command from your image-editing
program.
Scan Material menu.
appear in the Preview window.
the area to be scanned by dragging a rectangle around it. You will see a flashing
frame (marquee) around the selected area.
Scan Frame tool. A thumbnail of the image appears as well in the Scan Job
Queue window.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
"Automatic Color Restoration" box in the Settings window.
• If ScanWizard Bio was launched from an application program, the image is then
delivered to your application, where the image can be saved, printed, or edited.
• If ScanWizard Bio was launched in stand-alone mode, you will be prompted to
specify the file attributes for the scanned image after the Scan or Scan to
button is pressed, such as entering the file name, specifying a folder name of
your own, etc. When you have completed the settings, press the Done/Save
button, and the scanner will automatically scan and save your image based on
your settings.