Samsung NV70F37 Series User Manual page 301

troubleshooting & error code
TROUBLESHOOTING
PROBLEM
What should I do if the oven
doesn't heat up?
What should I do if the oven
doesn't heat up even after the
function and temperature have
been set?
What should I do if an error
code appears and the oven
does not heat up?
What should I do if the time
1)
display is blinking?
**
What should I do if the oven
light doesn't illuminate?
What should I do if the oven's
fan is running without having
been set?
ERROR CODE
CODE PROBLEM
Safety shut off. The oven continues
operating at the set temperature for a
1)
** prolonged time.
Key is pressed for over 10 seconds.
1)
**
Divider Missing. Divider use is
incorrect.
An oven error may cause low
1)
**
performance and problems in safety.
Stop using the oven immediately.
1) ** refers to all numbers.
NV70F3784LB_OL_DG68-00522K-01_EN.indd 21
SOLUTION
• The oven may not be switched on. Switch the oven on.
• The clock may not be set. Set the clock.
• Check to see if the required settings have been applied.
• A household fuse may have blown or a circuit breaker
may has tripped.
Replace the fuses or reset the circuit. If this happens
repeatedly, call an electrician.
• There may be problems with the internal electrical
connections. Call your local service centre.
• There is a fault in the internal electrical circuit
connection. Call your local service centre.
• There has been a power failure. Set the clock.
• The oven light is faulty. Call your local service centre.
• After use, the oven's fan runs until the oven has cooled
down. Call your local service centre if the fan continues
to run after the oven has cooled down.
SOLUTION
Turn oven off and remove food. Allow
oven to cool before using it again.
Call your local SAMSUNG Customer
Care Centre.
Insert divider for upper, twin and lower
mode. Remove divider for single mode.
Call your local SAMSUNG Customer
Care Centre.
English - 21
2014-05-05 5:22:13