To adjust the clock.
To set the monitor function of A-BPM.
Step 1. Set the AUTO switch to "OFF".
Step 2. If the display is hidden, press the START/STOP
or EVENT switch to return to the waiting mode display.
Step 3. While pressing and holding the START/STOP switch, press and
hold the EVENT switch until Display (after Sleep ) is
displayed on the OLED.
Step 4. Operation switches are as follows:
Refer to "8.2.2. The Clock and the Monitor Function of Measurement"
EVENT switch ................. Change the current parameter.
START/STOP switch ...... Decision, next item, end of settings.
22