S-Bpm Programs - A&D TM-2441 Instruction Manual

6.2.1. S-BPM Programs

Office blood pressure
When the
once and is stored in the memory.
Blood pressure measurement
Press the
Automated office blood pressure
When the
First, the device is idle for the interval time to allow the patient to relax.
Next, the AOBP performs a "1 scope".
"1 scope" consists of a set of blood pressure measurements and
interval times, which are repeated for the number of times of the
measurement count. The last interval time is omitted.
When the
"1 scope" is stopped.
Blood pressure measurement
T
Press the
Press the
T
Press the
/ switch is pressed, blood pressure is measured
/ switch to start the measurement.
/ switch is pressed, AOBP is started.
switch is pressed during the "1 scope", the
/
T
switch to start the "1 scope".
/
switch to stop the "1 scope".
/
T
switch to start the "1 scope".
/
1 scope
T
T
T T
32
OBP
Time
AOBP
T: Interval time
T
Time
Not measured
T
Time