Leica Aperio GT 450 DX User Manual page 66

Chapter 6: Troubleshooting
CAUTION: Restarting the scanner with a slide on the stage might damage the slide.
3. If there is a slide on the stage, carefully remove it from the stage without touching the surrounding components.
4. If the pusher is extended, return the pusher to the safe position.
a. Align the pusher teeth with the slide stage
grooves:
c. Slide the pusher to the front of the scanner, as shown in the rightmost image below. Hold the pusher in one of
the areas circled below. Avoid touching the LED and objective.
66
b. Slide the stage to the rear of the scanner, as shown:
Aperio GT 450 DX User's Guide, Revision B © Leica Biosystems Imaging, Inc. 2022