Check Scan Status; Check Rack Status; Rack Error On Current Scan - Leica Aperio GT 450 DX User Manual

Check Scan Status

This section describes the different ways to check scan status.
CAUTION: If you must remove a rack before all slides in the rack are scanned, note the rack and slide status.
After removal, the rack's scan status is no longer available.

Check Rack Status

To check the scan status of a rack:
1. Check the rack position status color against the Legend:
2. The rack statuses are:
Empty
Complete
Scanning
Waiting to
Scan
Warning
Priority

Rack Error on Current Scan

If there is an error on at least one slide in the rack that is currently scanning, the rack position pulses blue and orange. See
"Rack Warnings" on page 42.
Aperio GT 450 DX User's Guide, Revision B © Leica Biosystems Imaging, Inc. 2022
Rack is empty and available for use.
All slides in the rack scanned successfully and passed image QC. Scanned images are
saved to the specific location.
The rack is currently being scanned.
The rack is loaded successfully and is waiting to scan.
There is an issue with the rack, or one or more slides in the rack. If you get a rack
warning, see page 42.
The rack is set for priority scanning. (See "Priority Scanning" on page 35.)
Chapter 4: Scan Slides
39