Leica Aperio GT 450 DX Manual page 24

Chapter 3: Configuring the Aperio GT 450 DX
The PIN Management settings allow you to create one or more PINs to be used to access the scanner. See "PIN
`
Management" on page 27 for more information.
To use the Configuration pages to view or edit settings:
1. Confirm that the Scanners icon in the banner is selected, and the page shows the list of scanners.
2. Click the Configuration icon to the right of the scanner you want to configure. The Images configuration page
displays.
3. Enter the configuration settings for images (DICOM), DSR, Event Handling, PIN Management, or Time Zone.
Click Images, DSR, Event Handling, PIN Management, or Time Zone in the side menu bar.
`
` Click Edit to make changes on the corresponding page. Note that you cannot make changes to settings in
shaded fields.
Refer to "PIN Management" on page 27 to add, delete, or modify PINs or change the timeout.
4. If you made changes, click Save to save the changes and return to viewing mode.
Refer to "Appendix B: Summary of Scanner Setting and Configuration Options" on page 42 for additional information on
each option.
24 Aperio GT 450 DX IT Manager and Lab Administrator Guide, Revision B © Leica Biosystems Imaging, Inc. 2022