Olympus DP73 Instructions Manual page 33

g
6
h
7
f
6
A thermal conduction sheet
cover. Remove the tapes
7
Remove the protective sheet (transparent)
} Remove tapes and protective sheet (transparent) carefully not to
move the thermal conduction sheet.
} Be sure to remove tapes and protection sheets (transparent).
8
Place the top cover in the original position and attach the clamping
screws .
a
If the heat conduction sheet is not used properly, the PCIe inter-
CAUTION
face board may be heated and could cause burns and damages.
is attached on the back of the top
f
.
g
h .
DP73
29