Attaching The Handle Unit With Grid - AGFA XD 17 User Manual

94 | XD 17, XD⁺17 | Getting started

Attaching the handle unit with grid

1. Lay down the grid on a flat surface.
2. Lay the DR detector in the grid, bottom edge first, with the tube side
facing down (1).
3. Attach the grid to the DR detector (2).
0434A EN 20210426 1355
2
CAUTION:
To safely attach the handle unit for making exposures using the
grid, follow these instructions.
WARNING:
Use only the grid that is supplied as option to the DR
detector.
1