Viewing The Detector Status - AGFA XD 17 User Manual

Viewing the detector status

The status display on the side of the DR detector is turned off by default.
The status display is controlled by pressing the power button (or the AP mode
button).
1 2
Power button with indicator light
1.
AP mode button
2.
Status display
3.
Figure 20: DR detector status display
1. Press the power button for about 1 second.
The status display turns on and shows the status of the DR detector:
• Battery status.
• Connection status.
2. Press the power button again.
The status display shows the IP address of the DR detector.
3. Press the power button again.
The status display shows the SSID name used by the DR detector.
The status display is turned off automatically after 60 seconds.
Topics:
• Battery status
• Connection status
3
XD 17, XD⁺17 | Advanced Operating | 97
0434A EN 20210426 1355