Table of Contents
Advertisement
88 | XD 17, XD⁺17 | Getting started
The images are downloaded from the DR detector.
A message is displayed.
Figure 19: A recovery image has been received
• The first image is stored on the thumbnail of the original examination.
• The other images are stored in recovery examinations. They are listed
7. Perform following steps for each image, starting with the first image, that
is available in the Offline Mode exam, and then the subsequent images in
the recovery exams.
8. Double click the examination in the worklist or select it from the drop-
down list in the title bar.
Sort the Worklist by patient name to see the examinations in
chronological order.
The image is opened in the Examination window.
9. Click the Edit button in the Image Detail pane to apply the correct image
settings.
Check the notes that were made while acquiring the offline images to
apply the correct image settings.
10. Assign the image to the right patient.
Check the notes that were made while acquiring the offline images to
match the image to the right patient.
• If patient data is entered manually and this is the first image in the
• In the other case, transfer the image to the examination with the
0434A EN 20210426 1355
in the Worklist window and in the drop-down list in the title bar.
WARNING:
A default image processing is applied, which may not be
optimal for the acquired images. Exposure type, view
position and image laterality are unknown while processing
the image and thus not taken into account.
offline workflow for the current patient,click the Edit button in the
Patient pane and fill in the correct patient data.
correct patient data.
1. Return to the Worklist window.
Make sure not to select another exam!
Advertisement
Table of Contents
