System Control Unit - AGFA XD 17 User Manual

System Control Unit

The System Control Unit is connected to the DR Detector via wireless network
or via the DR Detector cable.
The System Control Unit is connected to the X-ray generator to synchronize
the exposure, in a configuration with X-ray generator synchronization.
The System Control Unit is connected to the workstation via wired network.
Depending on the configuration, the System Control Unit may not be part of
the system.
1
Power switch
1.
Status indicator
2.
• Blinking green: starting up
• Green: ready
• Blue: communicating to the detector
Figure 6: System Control Unit (SCU) and Mini System Control Unit (Mini
SCU)
Related Links
System Control Unit
Mini System Control Unit
Safety directions for the System Control Unit
Safety directions for the power supply
1
2 2
WARNING:
Do not use the System Control Unit within the patient's vicinity.
on page 127
on page 128
XD 17, XD⁺17 | Introduction to the DR Detector | 23
on page 72
on page 70
0434A EN 20210426 1355