Table of Contents
Advertisement
Installing power switch
1. Insert the power switch into the slot from the front of the computer and press it until it clicks into place.
2. Align the cable with the pins on the connector and connect the cable.
3. Close the front panel door.
4. Install the:
a.
Front bezel
b.
Side Cover
5. Follow the procedure in
Speaker
Removing speaker
1. Follow the procedure in
2. Remove the:
a.
Side Cover
b.
Front bezel
3. Open the
front panel
4. To remove the speaker:
a. Disconnect the speaker cable from the connector on the system board [1].
After working inside your
Before working inside your
door.
computer.
computer.
Field service information
39
Advertisement
Table of Contents
