How To Use This Radio How To Use This Radio; Power On Radio; Automatical Power On Radio; Channel Control - CRT Mike Owner's Manual

HOW TO USE THIS RADIO

Power on radio

1.
Note:When the radio on, hold
key, the radio will power off. key, the radio will power off.
2. Adjust squelch level until you can hear background noise, refer to Page 7 about 2. Adjust squelch level until you can hear background noise, refer to Page 7 about 2. Adjust squelch level until you can hear background noise, refer to Page 7 about
Squelch level setup. Squelch level setup. Squelch level setup.
3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup. 3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup. 3. Adjust volume level to wanted level, refer to Page 7 about Volume level setup.
Automatic Power on Automatic Power on Automatic Power on
1. Short Press 1. Short Press 1. Short Press
2. Short Press 2. Short Press 2. Short Press key to enter Menu. key to enter Menu. key to enter Menu.
3. Repeatedly short press 3. Repeatedly short press 3. Repeatedly short press
POR: XXX
4. Press or
Repeat the above operation will turn off Automatic power on. Repeat the above operation will turn off Automatic power on. Repeat the above operation will turn off Automatic power on.

Channel control

1. Short Press
Channel.
2. Hold or
Note: Before using, check if the working frequency and Norms are valid in your country. If Note: Before using, check if the working frequency and Norms are valid in your country. If
not, change the norms according to following instruction. The radio is defaulted set on not, change the norms according to following instruction. The radio is defaulted set on
EUH (AM/FM 4W). The norms list see page 12.

Choose Norms

1. Short Press
2. Short Press key to enter Menu.
3. Repeatly short press
BAND: XXX
4. Press or
key until nothing appears on LCD and release
key until LCD displays key until LCD displays key until LCD displays
to choose POR: ON. to choose POR: ON. to choose POR: ON.
or key to choose key to choose
key to choose channel fastly.
key until LCD displays
to choose the norms
DN DN DN POW POW U UP
6