Lcd Display; Am/Fm Mode; Transmitting; Receiving - CRT Mike Owner's Manual

LCD display

Dot matrix LCD display for channel number, frequency and operations.
ASQ
M1-M4:
Storage location Storage location
Func Func Func
FM/AM Mode FM/AM Mode FM/AM Mode
Scan Scan Scan
Keypad lock icon Keypad lock icon Keypad lock icon
ASQ, SQ,VOL level ASQ, SQ,VOL level ASQ, SQ,VOL level
2 Digits for display of channel number and Norms 2 Digits for display of channel number and Norms 2 Digits for display of channel number and Norms
5 Digits for display of frequency and Norms 5 Digits for display of frequency and Norms 5 Digits for display of frequency and Norms 5 Digits for display of frequency and Norms 5 Digits for display of frequency and Norms

AM/FM mode

1. Short press
mode.
2. Corresponding mode will displayed in the LCD. 2. Corresponding mode will displayed in the LCD. 2. Corresponding mode will displayed in the LCD.

Transmitting

1. Hold [PTT] key, TX LED indicator light on.
2. Hold the microphone about 2cm away from
your mouth and speaker in a normal tone.
. 3 R e e l a e s P [ T ] T h t
TX LED indicator light off.

Receiving

The radio will keep in TX mode when it is not
transmitting, the RX LED indicator will light
on.
key to switch between AM/FM M key to switch between AM key to switch between AM/FM
e a r d o i u t n r o t R X m o d e
Dual watch
1W/4W: Power level
CH9/19
Current Voltage
Working norm
Current channel
RX signal strength,
PWR: TX signal strength.
8