Table of Contents
Advertisement
Note: Never press PTT before install the antenna, it might burn the transistor.
1. Screw on the antenna into antenna jack.
2. To make full use of this radio, it is necessary to locate the antenna in a well
2. To make full use of this radio, it is necessary to locate the antenna in a well
grounded place, and well adjust the SWR.
grounded place, and well adjust the SWR.
* Please enquiry the local dealer for choosing and intallation of suitable antenna.
* Please enquiry the local dealer for choosing and intallation of suitable antenna.
* Please enquiry the local dealer for choosing and intallation of suitable antenna.
This radio adopt 13.2V power supply.
This radio adopt 13.2V power supply.
This radio adopt 13.2V power supply.
Connect the red wire to the positive terminal of the battery, and the black wire to the
Connect the red wire to the positive terminal of the battery, and the black wire to the
Connect the red wire to the positive terminal of the battery, and the black wire to the
Connect the red wire to the positive terminal of the battery, and the black wire to the
Connect the red wire to the positive terminal of the battery, and the black wire to the
negative terminal of the battery.
negative terminal of the battery.
This radio adopt 2A, 250V fuse
1. Open the fuse holder
2. Replace the fuse and screw on the holder.
3
Advertisement
Table of Contents
