Table of Contents
Advertisement
Keypad lock
1. To avoid wrong operation of keys, you can hold
key to lock the keypad.
2. The LCD displays
3. Repeat the above function to unlock the keypad.
3. Repeat the above function to unlock the keypad.
Frequency mode
Frequency mode
Frequency mode
1. Hold
1. Hold
for over 5 sec
for over 5 seconds, the display will
for over 5 sec
change to frequency mode.
change to frequency mode.
change to frequency mode.
2. Repeat hold
2. Repeat hold
2. Repeat hold
for over 5 seconds, the display
for over 5 seconds, the display
for over 5 seconds, the display
will change to channel mode.
will change to channel mode.
will change to channel mode.
Scan
1. Set SQ or
2. Short press
key to start scannin
key to start scanning the LCD
displays SC.
3. Press any key to stop scan, SC disappear.
3. Press any key to stop scan, SC disappear.
3. Press any key to stop scan, SC disappear.
Memory channel
In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.
In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.
In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.
1. Choose the channel to be stored
2. Hold the memory key (M1, M2, M3, M4) to store it.
2. Hold the memory key (M1, M2, M3, M4) to store it.
2. Hold the memory key (M1, M2, M3, M4) to store it.
3. The corresponding memory channel will show on
LCD, the storage is done.
Using Memory Channel
1. Short press
2. Short press the memory key ( M1, M2 ,M3, M4 )
3. MEM disappears, the memory channel you chose will display in LCD.
3. MEM disappears, the memory channel you chose will display in LCD.
3. MEM disappears, the memory channel you chose will display in LCD.
LCD Brightness
1. Short press
key
2. Short Press
key to enter Menu.
3. Repeatly short press
BRI: XX
4. Press
or
.
y.
y.
canning the LCD
g the LCD
key until LCD displays
to choose brightness level.
w on
10
Advertisement
Table of Contents
